PRODUCT DETAILS

Jawa Exterior Primer is water based high quality 100% acrylic based ready to use filler for all types of interior masonry surfaces suc as brick work, plaster and cement rendering.

SURFACE PREPARATION

-New OR BARE SURFACES

New or bare surfaces must be clean, dry and free from efflorescent salts.

PREVIOUSLY PAINTED SOUND SURFACE

Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff brush and dust off, treat any area affected by mould, lichens, algae or moss with

bleach, After priming new surfaces with Jawa Exterior primer, fill the surfaces with Jawa Wall Filling Allow the filler to dry for 2-3 hrs and apply second coat of Jawa Exterior Primer Jawa Exterior Primer Can also be applied directly on new unpainted surfaces. Jawa Exterior Primer is not recommended for Interior use.

POWDERY DUSTY SURFACES

Make good minor defects. For large holes and cracks use sand and cement mixture. Allow to dry. Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or grinder and dust off.

TECHNICAL INFORMATION:

Coverage :  5-6m²/kg/coats

Drying Time: 2-3 hours between coats Application:

Brush applicator Thinner:   Clean Water

Cleaning: Clean all equipment with water

SAFETY PRECAUTION

Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles, dust mask and gloves. Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapour or spray.

FIRST AID

Eyes: In the event of accidental splashes, flush eyes with water immediately and obtain medical advice.

Skin: Wash skin thoroughly with soap and water or approved industrial cleaner. DO Not Use solvent or thinners.

Inhalation: Remove to fresh air, loosen collar and keep patient rested.

Ingestion: In case of accidental ingestion DO NOT INDUCE VOMITING. Obtain immediate medical attention.