ALUMINUM FINISH

PRODUCT DETAILS

Jawa Aluminum Finish is a silver paint with a high metallic luster which protects the surface from corrosion, discoloration and effects of heat. Type uses include chimneys, pipelines, storage vessels, steam pipes, machinery. Surfaces, oven door and heat exchanger.

SURFACE PREPARATION

-New OR BARE SURFACES

New or bare surfaces must be clean, dry and free from dirty, grease & wax etc

PREVIOUSLY PAINTED SOUND SURFACE

After rubbing down with abrasive paper dust off with cloth. Surface must be clan, dry, grease wax etc. All surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dust off.

Apply tow to three coats of aluminum paints.

TECHNICAL INFORMATION:

Coverage :    14-16m²/Liter/coats Drying Time: 24 hours between coats Application:

Brush or spray gun Thinner:   Turpentine

Cleaning: Clean all equipment with Turpentine.

STIR THOROUGHLY BEFORE USE

SAFETY, HEALTH AND ENVIRONMENTAL INFORMATION

Keep out of reach of children. Keep away from ignition because it is flammable. Avoid smoking. Always keep container air tight. Ventilation should be ensured because it contains white spirit. If you are not a professional do not use it on large surfaces or in small confined places. Use of mask is advised. You must wear eye protection while applying paint. In case of ventilation is insufficient use of proper respiratory equipment is advised. In case of contact with eyes, wash with brim full of water and

see the doctor immediately. To remove splashes from skin use water and soap or recognized skin cleaner. Take extra care while transporting paint from one place to another. Protect it from extreme temperature and keep it in cool place Please do not empty it into drain or water courses. Appropriate environment quality regulations must be observed while disposing off the paint.