WALL FILLING

PRODUCT DETAILS

Jawa Wall Filing is a high quality water-based Filler for interior & exterior masonry surfaces, such as brick work, plaster, cement. It reduces damage from alkali and salts and improves coverage of top coats.

SURFACE PREPARATION

New OR BARE SURFACES

Surface must be clean, dry and free from efflorescent salts. Rub down the surface by using sanding stone and using suitable abrasive paper and dust off.

Powdery, dusty, surfaces, cracks and other surface defects

Make good minor defects. For large holes and cracks use sand and cement mixture. Allow to dry. Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or grinder and dust off.

PREVIOUSLY PAINTED SURFACE

Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or grinder and dust off.

TECHNICAL INFORMATION:

Coverage: 8-10m2/Liter/coat Application: Scraper Thinner: Clean Water Thinning:

No of coat: 2-3

Drying Time: 2-3 Hours between coats Cleaning: Clean all equipments with water

SAFETY PRECAUTION

Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles, dust mask and gloves. Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapour or spray.

FIRST AID

Eyes: In the event of accidental splashes, flush eyes with water immediately and obtain medical advice.

Skin: Wash skin thoroughly with soap and water or approved industrial cleaner. DO Not Use solvent or thinners.

Inhalation: Remove to fresh air, loosen collar and keep patient rested.

Ingestion: In case of accidental ingestion DO NOT INDUCE VOMITING. Obtain immediate medical attention.