PRODUCT DETAILS

Jawa Red Oxide Primer is a Solvent-based anti-corrosion protective primer for interior and exterior ferrous & non-ferrous metal work including new and pre-treated zinc and galvanized iron after using pretreatment primer.

SURFACE PREPARATION

-New OR BARE SURFACES

Surfaces must be clean, dry, free from dirt, grease, wax etc. Thoroughly rub down using the suitable abrasive paper and then dust off. apply one coat of red oxide primer.

Galvanized and aluminum Surfaces

New galvanized and aluminum surfaces should be cleaned and degreased. Then pre treat with etch primer to ensure good adhesion. Apply one coat of red Oxide Primer

Previously Painted Surface

Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off.

Finishing

After surfaces preparation apply 2-3 coats of top coat. stir thoroughly before use. Contains no added lead or mercury.

TECHNICAL INFORMATION

Coverage : 11-13-m3/Liter/Coat Thinner : Mineral Turpentine No. of coats : 1

Cleaning : Clean all equipment with mineral turpentine

STIR THOROUGHLY BEFORE USE

SAFETY, HEALTH AND ENVIRONMENTAL INFORMATION

Keep out of reach of children. Keep away from ignition because it is flammable. Avoid smoking. Always keep container air tight. Ventilation should be ensured because it contains white spirit. If you are not a professional do not use it on large surfaces or in small confined places. Use of mask is advised. You must wear eye protection while applying paint. In case of ventilation is insufficient use of proper respiratory equipment is advised. In case of contact with eyes, wash with brim full of water and see the doctor immediately. To remove splashes from skin use water and soap or recognized skin cleaner. Take extra care while transporting paint from one place to another.

Protect it from extreme temperature and keep it in cool place Please do not empty it into drain or watercourses. Appropriate environment quality regulations must be observed while disposing off the paint.