EXTERIOR FILLER
Jawa Exterior Filler is water based high quality 100% acrylic based ready to use filler for all types of interior masonry surfaces such as brick work, plaster and cement rendering.
PRODUCT DETAILS
Jawa Exterior Filler is water based high quality 100% acrylic based ready to use filler for all types of interior masonry surfaces such as brick work, plaster and cement rendering.
SURFACE PREPARATION
-New OR BARE SURFACES
New or bare surfaces must be clean, dry and free from efflorescent salts.
PREVIOUSLY PAINTED SOUND SURFACE
Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff brush and dust off, treat any area affected by mould, lichens, algae or moss with bleach, After priming new surfaces with Jawa Exterior filler fill the surfaces with Jawa Wall filler.
Allow the filler to dry for 2-3 hrs and apply second coat of Jawa Exterior Filler Jawa Exterior Primer Can also be applied directly on new unpainted surfaces. Jawa Exterior Filler is not recommended for Interior use.
TECHNICAL INFORMATION:
Coverage : 5-6m2/kg/coats
Drying Time: 2-3 hours between coats Application: Scraper
Thinner: Clean Water
Cleaning: Clean all equipment with water
SAFETY PRECAUTION
Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles, dust mask and gloves. Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapour or spray.
FIRST AID
Eyes: In the event of accidental splashes, flush eyes with water immediately and obtain medical advice.
Skin: Wash skin thoroughly with soap and water or approved industrial cleaner. DO Not Use solvent or thinners.
Inhalation: Remove to fresh air, loosen collar and keep patient rested.
Ingestion: In case of accidental ingestion DO NOT INDUCE VOMITING. Obtain immediate medical attention.
