PRODUCT DETAILS

Jawa Weather Guard  is an excellent quality emulsion which is specially formulated for use on all exterior surfaces, Jawa Weather Cover gives highly durable finish, long lasting protection & decoration to all exterior surfaces. The smooth finish of Jawa Paints Weather Cover has the highest degree of durability and is resistant to all types of weather conditions. it is specially developed for exterior surfaces including brick word, plaster, concrete, wall boards, gypsum etc.

SURFACE PREPARATION

-New OR BARE SURFACES

Surface must be clean, dry and free from efflorescent salts. Rub down the surface by using sanding stone and using suitable abrasive paper and dust off.

PREVIOUSLY PAINTED SOUND SURFACE

Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or grinder and dust off.

POWDERY DUSTY SURFACES

Make good minor defects. For large holes and cracks use sand and cement mixture. Allow to dry. Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or grinder and dust off.

TECHNICAL INFORMATION:

Coverage: 12 -14m²/Liter/coat Application: Brush/Roller Thinner: Clean Water

Thinning: By Roller/Brush 50-60% No of coat: 2-3

Drying Time: 2-3 Hours between coats Cleaning: Clean all equipment’s with water

WEATHER GUARD

SAFETY PRECAUTION

Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles, dust mask and gloves. Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapor or spray.

FIRST AID

Eyes: In the event of accidental splashes, flush eyes with water immediately and obtain medical advice.

Skin: Wash skin thoroughly with soap and water or approved industrial cleaner. DO Not Use solvent or thinners.

Inhalation: Remove to fresh air, loosen collar and keep patient rested.

Ingestion: In case of accidental ingestion DO NOT INDUCE VOMITING. Obtain immediate medical attention.