SYNTHETIC VARNISH
Jawa Synthetic Varnish is a solvent based varnish for interior and exterior wood well as metal surfaces. Typical uses include paneling, cane and wood furniture, windows, doors and partitions.
PRODUCT DETAILS
Jawa Synthetic Varnish is a solvent based varnish for interior and exterior wood well as metal surfaces. Typical uses include paneling, cane and wood furniture, windows, doors and partitions.
SURFACE PREPARATION
New OR BARE SURFACES
New or bare surfaces must bee dry, clean and free from dirty, grease wax etc. rub down with abrasive paper and then dust off. Always surface along the grains. After Surface preparation apply 2to 3 Coats of Jawa synthetic varnish.
TECHNICAL INFORMATION:
Drying : 16 Hours
between coats Coverage : 12-14m2/liter/coat
Thinner : Mineral Spirit/ Turpentine/Petrol Thinning : 10-15% Brush
Spray : 20-25% No of coats : 2-3
Application : Brush / Spray
Cleaning : Clean all equipment with Turpentine
STIR THOROUGHLY BEFORE USE
SAFETY, HEALTH AND ENVIRONMENTAL INFORMATION
Keep out of reach of children. Keep away from ignition because it is flammable. Avoid smoking. Always keep container air tight. Ventilation should be ensured because it contains white spirit. If you are not a professional do not use it on large surfaces or in small confined places. Use of mask is advised. You must wear eye protection while applying paint. In case of ventilation is insufficient use of proper respiratory equipment is advised. In case of contact with eyes, wash with brim full of water and see the doctor immediately. To remove splashes from skin use water and soap or recognized skin cleaner. Take extra care while transporting paint from one place to another.
Protect it from extreme temperature and keep it in cool place Please do not empty it into drain or watercourses. Appropriate environment quality regulations must be observed while disposing off the paint.
