PRODUCT DETAILS

Jawa Super Sealer is a high quality solvent-based alkali resistance primer for masonry surfaces. It is ideal for use on all interior surface. It provides an excellent adhesion with the surface and topcoat.

SURFACE PREPARATION

New OR BARE SURFACES

New or bare surface must be clean, dry and free from efflorescent salts, Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff brush and dust off. treat any area affected by mould, lichens, algae with bleach. Primer the new surface with Jawa Super Sealer. Dry overnight & fill the surface with Jawa Wall Filling. Allow the sealer to dry for 3-4 hours.

PREVIOUSLY PAINTED SOUND SURFACE

Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff brush and dust off. Spot prime & fill the surface as described above if required.

Powdery, dusty, surfaces, cracks and other surface defects

Make good minor defects. For large holes and cracks, use sand and cement mixture. Allow to dry. Prime the surface with Jawa Super Sealer, dry overnight and then fill any surface imperfections with Jawa Wall Filling as described above. Allow to dry for 3-4 hours. Scuff surface using abrasive paper and dust off.

FINISHING

After surface preparation, apply 2-3 coats of topcoat Stir thoroughly before use

Contains no added lead or mercury

TECHNICAL INFORMATION:

Coverage:  14-16  m/Liter/coat Drying Time: 2-3 H2ours between coats No of coat: 1

Thinner: Turpentine Oil

Cleaning: Clean all equipment with turpentine oil

Refer to technical data sheet for correct thinning and application procedure.

STIR THOROUGHLY BEFORE USE

SAFETY, HEALTH AND ENVIRONMENTAL INFORMATION

Keep out of reach of children. Keep away from ignition because it is flammable. Avoid smoking. Always keep container air tight. Ventilation should be ensured because it contains white spirit. If you are not a professional do not use it on large surfaces or in small confined places.Use of mask is advised. You must wear eye protection while applying paint. In case of ventilation is insufficient use of proper respiratory equipment is advised. In case of contact with eyes, wash with brim full of water and see the doctor immediately. To remove splashes from skin use water and soap or recognized skin cleaner. Take extra care while transporting paint from one place to another.

Protect it from extreme temperature and keep it in cool place Please do not empty it into drain or watercourses. Appropriate environment quality regulations must be observed while disposing off the paint.